Finally a Rife Machine! 
Megabite
16 y
15,143
† Cross †
Finally I can get a Rife Machine but I have a couple questions since I am not really that knowledgeable yet about these machines. I am looking at an Atelier Robin F165 or maybe an EMX.
Which of these two would be best as a first machine?
I don't yet want to spend a lot of money and buy both at once. And, is it better to get a Plasma machine first, like the EMX? My understanding about Plasma Machines is that you only have to have them near you but not touch them as you would the F165. Is this true? (forgive my ignorance as I've only been used to using a Zapper)
I will mostly be treating Lyme.
Or if there is an even better first machine for around the same cost please let me know.
Any help or suggestions would be much appreciated!
More
- Re: Finally a Rife Machine! UserX
16 y
14,067
This is a reply to # 1,316,198Here's a post by Newport many many months ago.. not sure if he feels the same now:
//www.curezone.org/forums/fm.asp?i=1100850#i
- Re: Finally a Rife Machine! Megabite
16 y
13,928
MoreThis is a reply to # 1,316,203Thanks. I had a feeling it would be the F165. Seems like a pretty strong machine. Hopefully if Newport or anyone else feels any differently they will speak up.
- Re: Finally a Rife Machine! Megabite
16 y
13,928
- Re: Finally a Rife Machine! Newport
16 y
14,386
MoreThis is a reply to # 1,316,198>> Which of these two would be best as a first machine?
There is no "best" rife machine, they each appear to hit things from a different angle, I was going to point you to a Brian Rosner video but it appears to have disappeared:
http://lymecommunity.com/forums/ubbthreads.php/ubb/showflat/Number/4018/page/...
Certainly for Lyme I would use a PLASMA machine but you still need to drive it with a Frequency Generator like the F125/165. The F125 is $500 cheaper and can be upgraded when needed. In short if possible get a plasma device and a frequency generator:
http://www.atelierrobin.net/p7.htm
This is a board that you can use to buy and sell used equipment
http://www.drloyd.com/bb/viewforum.php?f=2&sid=68467aeee3546d02479dd120e58eca9b
- Re: Finally a Rife Machine! Megabite
16 y
14,090
This is a reply to # 1,316,234I don't understand, can't the EMX be used as a stand-alone machine?
Sorry, I know only a little, I'm still learning about how Rife works.
- Re: Finally a Rife Machine! - EDIT Newport
16 y
14,461
This is a reply to # 1,316,652All non contact Rife machines come in 2 pieces, the Frequency Generator (FG) and the Plasma/Magnetic device.
The EMX comes with a manual FG that you can skip and get an ~$80 refund for. The unit is basic and won't go below one Hz (I believe).
The problem with a NON programmed FG is that you must set a timer and manually change the frqs as per info. It also makes it difficult to use things like converge or fuzz unless you are manually entering them. In short no chance of having a snooze while rifing...
Not only can the F125/165 be used as a contact device it can also be used to drive any of the plasma devices, I am running my new PERL with the F165.
But IMO the MOST important aspect is the ability to combine channels like a pulse and the main frequency with the F125 and three channels like a pulse the main frq and a harmonic with the F165.
On the scale of importance, pulsing is MOST important but I have had great success using harmonics and am currently using x11 as per this link with good results: //www.curezone.org/forums/fm.asp?i=1312301#i
Keep in mind you don't need to understand this all at once, there are plenty of pre-made scripts for the F125/165 available for download that incorporate most of this already using CAFL numbers.
EDIT
Zipped folders of frequency files for the Atelier Robin function generator
http://www.electroherbalism.com/Bioelectronics/FrequenciesandAnecdotes/F100/i...
- Re: Finally a Rife Machine! - EDIT Megabite
16 y
13,942
This is a reply to # 1,316,659Okay I get it, thanks Newport. With all that in mind I think I'll just go ahead and get the 165 now and get a Plasma machine soon. Hopefully a PERL if I can work out the expense. Sounds like the best Plasma machine!
- Re: Finally a Rife Machine! - EDIT Newport
16 y
14,003
This is a reply to # 1,316,672Make sure you order the CBL2, BNC->aligator clips, so you can hook it up to your zapper footpads/handholds.
- Re: Finally a Rife Machine! - EDIT Megabite
16 y
14,043
This is a reply to # 1,316,703My Zapper is getting pretty worn out, I only have plain copper pipe handholds and I never had footpads for it so I will probably just go ahead and order the F165 setup from these guys:
http://www.pachealthonline.com/products.htm
Maybe I could get it all for less directly from Atelier but I don't see that they sell the footpads.
- Re: Finally a Rife Machine! - EDIT Newport
16 y
14,067
This is a reply to # 1,316,722You can get footpads anywhere including Parazapper and eBay.
This package is double the cost of the F165 from AR for nothing special, the amplifier is NOT required and useless for anything above 20khz.
If you wait for JAB he has a link to premium pads but if you want to not polish then get the SS ones from UZ: http://zap.intergate.ca/footpads.htm
BTW: Metal Supermarket or some shop will cut those up from scraps for a few bucks...construction boom is over...- Re: Finally a Rife Machine! - EDIT Johny Apple Bomb
16 y
14,180
This is a reply to # 1,316,763You can't go wrong with an F165. The F165 is used by many professionals. By default it outputs a positive offset square wave just like a Hulda Clark Zapper. Many plasma devices require pulsed DC which is the same as a positive offset.
I prefer banana cables.
BNC to banana jacks. Converts the BNC output of our generators into + and -
female banana jacks
http://www.atelierrobin.net/p7.htm
Here's a good set of hand holds.
http://shop.toolsforhealing.com/Copper_Handholds_for_RSG_1_p/sr-chh.htm
- Re: Finally a Rife Machine! - EDIT Megabite
16 y
13,677
This is a reply to # 1,316,777Thanks JAB for the tips. This will cost much less than the 165 setup from the other place. I can hardly wait to use it!
- Re: Finally a Rife Machine! - EDIT Megabite
16 y
13,677
- Re: Finally a Rife Machine! - EDIT Megabite
16 y
13,962
This is a reply to # 1,316,763Yeah I definitely want to save money. That's a pretty high mark up by what you describe. I'll just order direct from Atelier and get footpads.
Where can I get handholds for it though? It looks like Atelier doesn't have them.
- Re: Finally a Rife Machine! - EDIT Newport
16 y
14,006
This is a reply to # 1,316,779JAB just posted the link in the message above.
I have written a few times now that I don't use handholds while using footpads with the F165, I personally see no need for them both.
- Re: Finally a Rife Machine! - EDIT Megabite
16 y
13,758
This is a reply to # 1,316,781Interesting. That's right. I don't know if it was one of your posts or not but I remember I read somewhere that using footpads only helps the frequencies (or whatever) get to the brain and head area? Which is where I also want to focus on.
- Re: Finally a Rife Machine! - EDIT Johny Apple Bomb
16 y
13,871
This is a reply to # 1,316,787It's probably best to use both foot pads and handholds. This link shows how to connect them.
http://www.paradevices.com/footpad_zapping.html
Notice the ground is only connected in one place. You really only need one foot pad (piece of metal) for both feet because they are both hooked up to the positive.
But if your only going to use foot pads without handhold you'll need 2 foot pads for positive and negative.- Re: Finally a Rife Machine! - EDIT Megabite
16 y
13,857
- Re: Finally a Rife Machine! - EDIT Megabite
16 y
13,857
- Re: Finally a Rife Machine! - EDIT Johny Apple Bomb
16 y
13,871
- Re: Finally a Rife Machine! - EDIT Megabite
16 y
13,758
- Re: Finally a Rife Machine! - EDIT Newport
16 y
14,006
- footpads johng
16 y
13,542
This is a reply to # 1,316,763I think the latest info I saw from dr. clark was to use copper pipe for foot contact. resting the foot on pipe puts more pressure on the contact, better conductivity...
John- Re: footpads Newport
16 y
13,739
This is a reply to # 1,317,389I thought I read that somewhere else not from HC, but where ever that was it was using larger pipe pieces.
- Re: footpads Newport
16 y
13,739
- Re: Finally a Rife Machine! - EDIT Johny Apple Bomb
16 y
14,180
- Re: Finally a Rife Machine! - EDIT Newport
16 y
14,067
- Re: Finally a Rife Machine! - EDIT Megabite
16 y
14,043
- Re: Finally a Rife Machine! - EDIT Newport
16 y
14,003
- Re: Finally a Rife Machine! - EDIT Megabite
16 y
13,942
- Re: Finally a Rife Machine! - EDIT Newport
16 y
14,461
- Re: Finally a Rife Machine! Megabite
16 y
14,090
- Machine that uses electro-magnetic s... nomorepain
16 y
14,369
This is a reply to # 1,316,198For those in pain, there is a machine that uses electro-magnetic stimulation to banish pain. You can read about it in a book on Amazon. The title is PAIN BANISHMENT, NOT PAIN MANAGEMENT ~ EVEN WHEN NOTHING ELSE WORKS ~. For a freebie preview, go to Google Book Search. You can read the first part of the book online. This is worth checking out. This machine has been in use since the 1990's and has a long track record of success. But it is a Rx device and not available for sale without a Rx.
Best to all. - Re: Finally a Rife Machine! fire horse
15 y
13,621
This is a reply to # 1,316,198ok -- i'm on the tail end of a research binge here.
-- and totally glomming on to megabite's question.
in short: limited funds, long term illness in family member, quite severe, infectious based extreme neurological symptoms caused by lyme and co-infections babesia, bartonella and mycoplasma (yes, all of them), want rife technology as close to royal rife as i can get nowadays (i have read alot but still go bleary eyed when those of you that know the machines speak of them)
please, in plain english, what is my best bet, what would those experienced do, in my position, as far as technology to research and utilize now.
(disclaimer: i amthe type who will research anything recommended here to an extreme - i just need some help becaise rife is so technical and dense at first)
all the best in your healing,
fire horse
- Re: Finally a Rife Machine! UserX
16 y
14,067
fetched in 0.0625 sec, IP =172.70.179.156, y=1