What Low Frequencies Sound Like
After my research I believe some form of a Faraday Cage is the best way to eliminate Radio Frequencies. They create an area where the frequencies can’t get through and get grounded to the ground, like what happens when you get struck by lightening in a car.
You can read some info on shielding at the next three links if you like.
This Is A Youtube Video With A Science Teacher Demonstrating How Faraday Cages Work With Electrical Charges And AM Radio Frequencies http://www.youtube.com/watch?v=t23iXhEiQUc
Notice how his cage blocks AM frequencies that are broadcast at 5.35KHz-1605KHz, (That’s low for frequencies) but notice it didn’t block his wireless mic which broadcasts at a higher frequency? Let me explain.
For radio frequencies, the lower the frequency, the larger or longer the wave. The frequencies put out by those sub-woofers in cars (The ones that boom, boom, boom) can’t be heard in the car because a wave at 100 hertz is about 10 feet long. The wire mesh in that video had pretty large squares in it, (It looked like ½ inch to 1 inch squares) so it will only blocked lower frequencies. As a result his cage will block all frequencies that are lower than approximately 1600 kilohertz. To block higher frequencies, the mesh has to be smaller. The mesh has to be around 20% smaller than the frequency you want to block. Also for a Faraday cage to provide maximum protection, it has to be grounded. It will provide protection without being grounded but not nearly as well. It will act more like a reflector.
When looking for a mesh you want higher conductivity and a higher permeability material. You also want the highest squares per inch. 400 squares per inch is the highest I’ve found.
It also turns out shielding yourself from Radio Frequencies is good for your health weather Project Blue Book is up and running or not.
Since apparently they can single out an individual, group or thing to harass with radio frequencies,
This first link sells material that are designed to be used in your clothing and will shield you from up to 18GHz frequencies. The frequency for various radio broadcasts goes up to 108MHz. Microwaves are from 3GHz-300GHz, so I would think, unless they're crazier than I thought, they would have to broadcast below 3GHz or they would be turning the Earth into a microwave and everything would die.
Supposedly during Desert Storm they mixed in UHF frequencies (300MHz-3GHz) along with FM radio frequencies (88 MHz -108 MHz) and broadcast these “Silent Sounds” to the Iraqi soldiers and caused them to surrender. http://www.democraticfundamentalism.org/2005/psychotronics/government/1991mil... Here’s a quote from the article:
“ALTHOUGH COMPLETELY SILENT TO THE HUMAN EAR, THE NEGATIVE VOICE MESSAGES PLACED ON THE TAPES ALONGSIDE THE AUDIBLE PROGRAMMING BY pSYoPS PSYCHOLOGISTS WERE CLEARLY PERCEIVED BY THE SUBCONSCIOUS MINDS OF THE IRAQI SOLDIERS AND THE SILENT MESSAGES COMPLETELY DEMORALIZED THEM AND INSTILLED A PERPETUAL FEELING OF FEAR AND HOPELESSNESS IN THEIR MINDS.”
Since UHF frequencies are 300MHz-3GHz and this material blocks up to 18 GHz, it should be able to block ALL their Silent Sound crap and any Extra Low Frequencies (ELF) they might use in Project Blue Book or in any other plan they may come up with, in my opinion.
OK, so on to the materials:
EMF Shielding & Conductive Fabrics (This is the site I like best so far)
This link has pre-made clothing you can buy from the same site.
FAQ About EMF Shielding
Another Site That Sells Various RF Products
A Site That Sells Silver Coated Nylon Yarns, Flock And Fibers:
A couple of other sites that sell shielding for buildings and such.
SHIELDING SOLUTIONS (A site for radiation shielding)
Here’s My Maybe Category: These devises “may” provide help.
This site says its foil is good for shielding microwaves. I think they use this stuff in microwaves don’t they? So it may work.
Tin Foil Hats
Here’s The Same Site On Faraday Cages: http://www.nationmaster.com/encyclopedia/Faraday-cage
Here’s the same site on Electromagnetic shielding: http://www.nationmaster.com/encyclopedia/Electromagnetic-shielding
And Wiki on tin foil hats:
Why can't you use lead or copper or aluminum foil for magnetic shielding?
Similarly, if the source of the field is outside of the enclosure, the magnetic field lines will travel through the material of the enclosure on their way back to the source, never finding it more efficient to permeate the air space inside the enclosure. For these reasons, enclosing either the source of the field, or the thing(s) that you wish to protect from the field, offers the most effective use of the shielding material, and is usually the most cost efficient as well!
Here’s My Who Knows Category:
I read at one of the next two sites that the way radio frequencies work is by heating up the ears and exciting the inner nerves and going straight to the brain that way. So it is most important to cover the ears with one of the materials from above, but they also said some people have been able to receive frequencies through different parts of the body. So just covering the ears may not work with Project Blue Beam. Who knows.
This is supposed to produce calming effects by producing those type of frequencies that calm the brain. Good for meditation and such. I should probably get one anyway.http://www.neurophone.com/grs.htm
The NEUTRALEC® P.P.D.
Orgone Generators (I think most here at this site know about these)
Seawater And Quartz Crystals
A Couple Of Other Things I Found While Doing This: