Adjustable frequency: Lower band: from 1 Hz to 999 Hz. (possibility to set with precision of thousands Hz.) Higher band: from 1 kHz to 900 kHz with ratio 1:1. pulse steepness about 30 nS.
The speed of the shift is adjustable for: Lower band: 0.01 Hz to 2.55 Hz per second. Higher band: 0.01 kHz to 2.55 kHz per second.
Voltage: 15 - 30V Dc. Internal 12V accumulator. External network miniature switched adapter 24V/1A input 100 – 265 VAC 25W 50-60Hz with protection against short circuits and thermal protection.
Accumulator capacity: Period of work is approximately 12 hours non-stop. Charging to fully charged status in approximately 12 hours. Warning in the case of discharging status about 1 hour before self-disconnection. Percentage display of remaining energy in accumulator.
Input voltage, adjustable: (top-top): approximately 5 - 15 V.
Measurement of consumed current on output: Electrodes free, electrodes clamped, short-circuit of electrodes + option for the disconnection of measurement. + Dynamic evaluation depending of the set frequency and output voltage.
Adjustable period of zapping: Up to 99 hours 59 minutes (minimum possible value is recalculated from the range and the speed of the frequency shift).
Memory: 85 various default frequencies with editing option.
Setting the backlight of the display: ON / OFF (automatic disconnection at low level of battery).
Setting waiting time for catching electrodes: 1 - 59 minutes.
Setting the length of pause between individual therapies: 1-59 minutes.
Time for automatic disconnection in the case of inactivity in the menu: 1 minute.
Communication with the user, inputs and outputs:
Backlight display 16 x 2 characters. Control using five buttons: Up, down, left, right, enter. Input for supply adapter with connector 5 x 2.1 mm . Inner sliding main switch. Output connector – socket cinch for interconnection of electrodes. Service programming connector used for factory purposes.
Electrodes: 2 pieces – made of stainless steel, diameter 30 x 1 mm with the length of 100 mm terminated by a plastic cap connected to the cinch connector 2 m very flexible cable containing in 1mm shell 260 cores with the diameter of 0.07 mm .