CureZone   Log On   Join
How to make CS?
 
k1357 Views: 1,580
Published: 12 years ago
 

How to make CS?


I would like to make CS first time at home. Your help would be much appreciated.

There are these options:

Silver P:
Properties: Pulses are at 20Vrms AC current limited adjustable from ~0.5mA to 26mA at a frequency of 10kHz.

Silver S:
Properties: Pulses are at 30VDC, current limited to ~10mA rms at a frequency of 10kHz

Silver Z:
Properties: Pulses are at 9VDC, current limited to ~10mA at a frequency of 10kHz

Silver AP:
Properties: Voltage is at 30VDC, current limited to ~0.5mA (min) to 26mA (max).

Silver M1P:
Properties: Pulses at 30VDC swap polarity every 2.5 minutes, current limit adjustable from ~0.5mA to 26mA .

Silver 2P:
Properties: Pulses at 60Vpp AC, current limited adjustable from ~0.5mA to 26mA at a frq of 100Hz.

Silver M2P:
Properties: 5 min 30VDC start then pulses are at 60Vpp AC current limited adjustable from ~0.5mA to 26mA at a frq of 100Hz at a frq of 100Hz.

It is confusing to me. Which one to choose? Thank you in advance.

 

 

 
Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


 

Donate to CureZone


CureZone Newsletter is distributed in partnership with https://www.netatlantic.com


Contact Us - Advertise - Stats

Copyright 1999 - 2021  www.curezone.com

1.062 sec, (1)