CureZone   Log On   Join
Re: Terminator Zapper polarities
david1o1 Views: 2,125
Published: 9 years ago
This is a reply to # 1,922,353

Re: Terminator Zapper polarities

With an oscilloscope, i read a peak output voltage of 9V or more on most zappers i have, not 7V...

As Parazapper explained, with a low cost multimeter you will be able to read the average voltage.
With a 50% duty cycle it is half the 9V so 4.5V and if the battery is used the output voltage usually drops (it depends on the features of the zapper), that's why you read 3.5V (half of 7V)
Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


Donate to CureZone

CureZone Newsletter is distributed in partnership with

Contact Us - Advertise - Stats

Copyright 1999 - 2021

2.469 sec, (1)