CureZone   Log On   Join
Re: We need data on your generator and methods
 
-2tuff- Views: 2,317
Published: 17 years ago
 
This is a reply to # 82,734

Re: We need data on your generator and methods


Right this is not a constant current unit which means it makes inferior silver to machines like Silvergen and Silverpuppy.

I would prefer you use the power supply when making the Colloidal Silver and this would mean removing the battery. I know its tripler system which helps with batteries but lets stick to the power supply.

You will need to run the machine for at least 2 hours if you are using cold water. The timings on the unit are useless unless boiling water is used. You should periodically clean the probes to help stop particles of silver residue falling in your solution. The problem with units which go over the glass is that if you use warm water that eventually the case etc wil get damaged. If you use hot water then use the machine for at least 20mins for 3-5ppm. You should stir the solution every 5 minutes especially when hot water is used to stop some of the clumping.

If you use this for bob beck wrist work then use it for 2 hours a day for 180 hours total.


--------------------------------------------------------------------------
FIghting the Medical Mafia Matrix & the aids SCAM
--------------------------{ 2TUFF }----------------------------------
------- Research the following excellent sources ------
--------------------------------------------------------------------------
Jon Rappoport, Harvey Bialy, Christine Maggiore
Dr Kary Mullis, Dr. Heinz Ludwig Sänger
Dr Peter Duesberg, Dr Robert Root-Bernstein
Dr Eleni Papadopulos-Eleopulos, Dr Valendar Turner
Dr Gordon Stewart, Dr Alfred Hässig, Dr Charles Thomas Jr
Dr Richard Strohman, Dr David Rasnick, Dr Charles Geshekter
Dr Etienne de Harven, Dr Joseph Sonnabend, Dr Casper Schmidt
Dr Heinrich Kremer, Dr Stefan Lanka

©†ƒ……•™¼‡_Original_Message_¾€š½ž¢«»¬ï°©

Right this is not a constant current unit which means it makes inferior silver to machines like Silvergen and Silverpuppy.

I would prefer you use the power supply when making the Colloidal Silver and this would mean removing the battery. I know its tripler system which helps with batteries but lets stick to the power supply.

You will need to run the machine for at least 2 hours if you are using cold water. The timings on the unit are useless unless boiling water is used. You should periodically clean the probes to help stop particles of silver residue falling in your solution. The problem with units which go over the glass is that if you use warm water that eventually the case etc wil get damaged.


--------------------------------------------------------------------------
FIghting the Medical Mafia Matrix & the aids SCAM
--------------------------{ 2TUFF }----------------------------------
------- Research the following excellent sources ------
--------------------------------------------------------------------------
Jon Rappoport, Harvey Bialy, Christine Maggiore
Dr Kary Mullis, Dr. Heinz Ludwig Sänger
Dr Peter Duesberg, Dr Robert Root-Bernstein
Dr Eleni Papadopulos-Eleopulos, Dr Valendar Turner
Dr Gordon Stewart, Dr Alfred Hässig, Dr Charles Thomas Jr
Dr Richard Strohman, Dr David Rasnick, Dr Charles Geshekter
Dr Etienne de Harven, Dr Joseph Sonnabend, Dr Casper Schmidt
Dr Heinrich Kremer, Dr Stefan Lanka
 

 
Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


 

Donate to CureZone


CureZone Newsletter is distributed in partnership with https://www.netatlantic.com


Contact Us - Advertise - Stats

Copyright 1999 - 2022  www.curezone.com

0.828 sec, (2)