CureZone   Log On   Join
 

Re: We need data on your generator and methods by -2tuff- ..... Colloidal Silver Forum

Date:   3/16/2005 4:00:10 PM ( 17 years ago ago)
Hits:   2,324
URL:   https://www.curezone.com/forums/fm.asp?i=82739

Right this is not a constant current unit which means it makes inferior silver to machines like Silvergen and Silverpuppy.

I would prefer you use the power supply when making the Colloidal Silver and this would mean removing the battery. I know its tripler system which helps with batteries but lets stick to the power supply.

You will need to run the machine for at least 2 hours if you are using cold water. The timings on the unit are useless unless boiling water is used. You should periodically clean the probes to help stop particles of silver residue falling in your solution. The problem with units which go over the glass is that if you use warm water that eventually the case etc wil get damaged. If you use hot water then use the machine for at least 20mins for 3-5ppm. You should stir the solution every 5 minutes especially when hot water is used to stop some of the clumping.

If you use this for bob beck wrist work then use it for 2 hours a day for 180 hours total.


--------------------------------------------------------------------------
FIghting the Medical Mafia Matrix & the aids SCAM
--------------------------{ 2TUFF }----------------------------------
------- Research the following excellent sources ------
--------------------------------------------------------------------------
Jon Rappoport, Harvey Bialy, Christine Maggiore
Dr Kary Mullis, Dr. Heinz Ludwig Sänger
Dr Peter Duesberg, Dr Robert Root-Bernstein
Dr Eleni Papadopulos-Eleopulos, Dr Valendar Turner
Dr Gordon Stewart, Dr Alfred Hässig, Dr Charles Thomas Jr
Dr Richard Strohman, Dr David Rasnick, Dr Charles Geshekter
Dr Etienne de Harven, Dr Joseph Sonnabend, Dr Casper Schmidt
Dr Heinrich Kremer, Dr Stefan Lanka

©†ƒ……•™¼‡_Original_Message_¾€š½ž¢«»¬ï°©

Right this is not a constant current unit which means it makes inferior silver to machines like Silvergen and Silverpuppy.

I would prefer you use the power supply when making the Colloidal Silver and this would mean removing the battery. I know its tripler system which helps with batteries but lets stick to the power supply.

You will need to run the machine for at least 2 hours if you are using cold water. The timings on the unit are useless unless boiling water is used. You should periodically clean the probes to help stop particles of silver residue falling in your solution. The problem with units which go over the glass is that if you use warm water that eventually the case etc wil get damaged.


--------------------------------------------------------------------------
FIghting the Medical Mafia Matrix & the aids SCAM
--------------------------{ 2TUFF }----------------------------------
------- Research the following excellent sources ------
--------------------------------------------------------------------------
Jon Rappoport, Harvey Bialy, Christine Maggiore
Dr Kary Mullis, Dr. Heinz Ludwig Sänger
Dr Peter Duesberg, Dr Robert Root-Bernstein
Dr Eleni Papadopulos-Eleopulos, Dr Valendar Turner
Dr Gordon Stewart, Dr Alfred Hässig, Dr Charles Thomas Jr
Dr Richard Strohman, Dr David Rasnick, Dr Charles Geshekter
Dr Etienne de Harven, Dr Joseph Sonnabend, Dr Casper Schmidt
Dr Heinrich Kremer, Dr Stefan Lanka
 

<< Return to the standard message view

fetched in 0.06 sec, referred by www.curezone.com/forums/fmp.asp?i=82739